Premium Quality High Density Polyethylene HDPE Resin for Molding Applications

Product Description

Product Description

Blow Molding Grade 5500 High Density Polyethylene Granules Resin Virgin PE Plastic HDPE

Hebei Aojin Import & Export Co., Ltd. is a leading manufacturer and supplier of high quality Blow Molding HDPE Pellet Resin Native Polyethylene Plastic HDPE. The company's products are known for their excellent mechanical properties and chemical resistance, and are suitable for a variety of manufacturing processes including blow molding. These properties make HDPE a popular choice for the production of a wide range of products, including plastic containers, pipes and automotive parts.

Product Properties:
The blow molded HDPE pellets offered by Hebei Shengping Import & Export Co. have excellent mechanical strength and chemical stability, and can withstand high temperatures and pressures. This makes HDPE an ideal material for durable products in industries such as packaging, construction, automotive and agriculture.

Applications:
The durability and cost-effectiveness of HDPE makes it widely used in packaging, construction, automotive and agricultural applications. In the packaging industry, HDPE is used for food and beverage containers as well as pharmaceutical and cosmetic packaging. In the construction industry, it is used as pipe and water tank material. In the automotive industry, HDPE is used for interior trim and components.

Production Process:
The company employs advanced production techniques to ensure the quality and consistency of blow molded HDPE pellets. The production process typically includes fine processing of raw materials, molding and surface treatment to achieve the highest quality standards.

Blow moulding grade High Density Polyethylene (HDPE) is a highly crystalline, non-polar thermoplastic resin with good heat and cold resistance, good chemical stability and high mechanical strength. It has a melting temperature between 120 and 160°C. For materials with larger molecules, a melting temperature range between 200 and 250°C is recommended1.

In the blow-moulding process, blow-moulding grade HDPE is commonly used to make hollow containers, large toys, floats, etc. Its characteristics include:
 

Environmental Impact:
Hebei Shengping Import & Export Co., Ltd. pays close attention to environmental protection during the production process, using sustainable raw materials and working to reduce waste and emissions to minimize the impact on the environment.

Market Trends:
The market for HDPE is expanding as consumer demand for sustainable products continues to grow. The Company actively monitors market trends and continually improves its products to meet customer needs.

Technological Innovation:
Continued investment in research and development has enabled Hebei Shengping Import & Export Co., Ltd. to introduce new blow-molded HDPE materials and molding technologies that improve product performance and reduce production costs.

Competing with other materials:
HDPE is more cost-effective and environmentally friendly than other materials such as metal or glass. It is lighter, more impact-resistant and offers better performance in many applications.

Supplier Information: Hebei Shengping Import & Export Co., Ltd. cooperates with well-known suppliers to provide high-quality blow molded HDPE materials and services. The company is committed to providing customers with the best solutions and ensuring timely delivery.

Detailed Photos

 

Product Parameters

 

No.	Grade	Type	MFR ( g/10min )	Tensile Strength MPa	Elongation At Break (%)	Environmental stress-cracking
1	5000S	Extrusion	0.9	23	800
2	5200B	Blow Molding	0.35	23	800	25
3	2200J	Injection Molding	5.5	23	180
4	3000J/JE	Injection Molding	2.3	26	400
5	6100M	Extrusion	0.13	18
6	1500J	Injection Molding	20	28	40
7	6600B	Blow Molding	0.35	23	500	100
8	6360M	Extrusion	0.22	24	600	1000
9	6380M	Extrusion	0.1	22	600	1500
10	7000F	Extrusion	0.042	24	450	300
11	2100J	Extrusion	6.5	20
12	1600J	Extrusion	18	25	40
13	7600M	Extrusion	0.04	22	600	10000
14	7800M	Extrusion	0.04	26	600	500
15	5300B	Blow Molding	0.4	23.5	480	600
16	2300XM	Extrusion	5.5	22	400	400
17	8200B	Blow Molding	0.03	25	500	600
18	8300B	Blow Molding	0.021	24	500	550
19	7300M	Extrusion	0.07	22	500	500

Performance of the project		Test condition [condition]	The test method	The test data	The data unit
Basic performance	Density mass index		GB/T 1033	0.948±0.002	g/cm3
	Density test results		GB/T 1033	0.948	g/cm4
	Melt flow rate mass index	190ºC/5.0kg	GB/T 3682	0.23±0.03	g/10min
	Melt flow rate test results		GB/T 3682	0.25	g/10min
	Melt flow rate mass index	190ºC/21.6kg	GB/T 3682	6.2±1.5	g/10min
	Melt flow rate test results		GB/T 3682	6.4	g/10min
Mechanical properties of	Tensile yield strength quality index		GB/T 1040	≥23	MPa
	Test results of tensile yield strength		GB/T 1040	27.6	MPa
	Elongation at break quality index		GB/T 1040	≥600	%
	Test results of elongation at break		GB/T 1040	804	%
	Quality index of impact strength of simply supported beam		GB/T 1043	≥25	KJ/m2
	Test results of impact strength of simply supported beam		GB/T 1043	26.7	KJ/m2
Other properties	Volatile matter quality index		GB/T 15658 1	≤350	mg/kg
	Volatile test results		GB/T 15658 1	Did not check out	mg/kg
Biochemical property	Cleanliness (color granule) quality index		SH/T 1541	≤20	grain/kg
	Cleanliness (color particle) test results		SH/T 1541	0	grain/kg
	Cleanliness (impurities) quality index		SH/T 1541	≤60	grain/kg
	Cleanliness (impurities) test results		SH/T 1541	0	grain/kg

 

Grades	HDPE PN049	HDPE-100	HDPE-80	HDPE-6081H	HDPE-3000JE
(5.0kg,190ºC)Melt mass-flow rate ,g/10min	0.26	0.26	0.43	6.22	2.2
Density,g/cm³	0.95	0.95	0.9458	0.9577	0.956
Tensile stress at yield,Mpa	23.3	23.3	21.3	26.1	24.8
Modulus of elasticity in tension,Mpa	882	882	-	-	-
Flexural modulus,Mpa	1047	1047	955	1057	1020
23ºC Charpy impact strength,KJ/m²	37.8	37.8	11.8H	4.2	12
Temperature of deflection under load(Tf0.45),ºC	77	77	-	-	68
Water content,mg/kg	14	14	58	-	-
Volatile content,mg/kg	213	213	112	-	-
0xidation induction time(0IT,210ºC),min	78.3	78.3	28.9	-	-
Nominal tensile strain at break,%	560	560	298	661	9.6
Application	drain pipe	drain pipe	Water pipe	Injection bottle cap	Injection bottle cap

 

Grades	HDPE-32F	HDPE-B507	HDPE-B502	HDPE-XP9020	HDPE-6098
(5.0kg,190ºC)Melt mass-flow rate,g/10min	1.98	6.43	1.86	0.14	0.38
Density,g/cm³	0.9373	0.948	0.9507	0.941	0.9494
Tensile stress at yield,Mpa	16.8	21.7	23.6	220	22.5
Modulus of elasticity in tension,Mpa	-	-	969	-	-
Flexural modulus,Mpa	741	-	-	6200	-
23ºC Charpy impact strength,KJ/m²	28.6P	-	43.1P	-	-
Temperature of deflection under load(Tf0.45),ºC	127.2	-	-	-	-
Water content,mg/kg	22	-	-	-	-
0xidation induction time(0IT,210ºC),min	65.7	-	-	-	-
Nominal tensile strain at break,%	869	850	774	>600	466
Application	PEX-A floor heating pipe	various types of bottles, cans and industrial tanks and barrels	various types of bottles, cans and industrial tanks and barrels	Floor heating pipe	Shopping bag,market bag,garbage bag,drain pipe,etc.

 

Grades	HDPE-TR400N	HDPE-YEC-5505T	HDPE-5000S	HDPE-1158	HD6007XA	HDPE-QHJ01
(5.0kg,190ºC)Melt mass-flow rate,g/10min	11.6(21.6kg)	0.7	1	2.1	0.6	0.7
Density,g/cm³	0.939	0.945	0.951	0.953	0.962	0.945
Tensile stress at yield,Mpa	20	19	25	24	30.5	18
Flexural modulus,Mpa	-	-	-	-	1700	9
23ºC Charpy impact strength,KJ/m²	-	-	-	32	-	-
Nominal tensile strain at break,%	799	500	800	600	300	500
Application	Blow molding geomembrane products	Base Resin of Chlorinated PolyethyleneBase Resin of Chlorinated Polyethylene	Package film, nets, ropes and small and medium-sized containers	Blow Molding Grade	Blow Molding Grade	Cable and wire

Main Product Showcase

 

Packaging & Shipping

1.Packing:
25kg/ carton or 25kg/bag, or per your requirement.
18mt/20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

 

During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

Application

HDPE is suitable for many plastic molding methods. Blow molding can be used for makingvarious types of bottles, cans and industrial tanks and barrels.
Injection molding is used formaking various containers and goods of daily use, such as basins, barrels and basketsand furniture.

After a large amount of inorganic filler is added, HDPE can also be usedas an alternative to timber and cardboards for making calcium plastic packing containers.furniture,doors and windows.

1.Film grade is widely used in the production of packing bag, film and so on.

2.Blow molding grade for making various bottles, cans, tanks , barrels Injection-molding grade is for making food cases, plastictrays, goods containers.

3.Blow film product:Foodstuff packing bag,groceries shopping bags, chemical fertilizerlined with film, etc

4.Extruded product: Pipe,tube mainly used in gas transportation, public water and chemicals
transport, such as building materials, gas pipe, hot water drain pipe etc: sheet material is
mainly used in the seat, suitcase, handling containers.

 

 

Company Profile

    Hebei Aojin Import and Export Co., Ltd.. is a comprehensive enterprise integrating industry and trade.

    The main products are Graphite electrode,Petroleum coke ,copy paper and other plastic raw materials (ldpe, hdpe, lldpe, pvc, pva, pbt, eva abs, eps, gpps, hips, pc Pet, etc.).

     We will strictly check every link from raw materials to finished products to ensure the quality and stability of products. We also have our own professional design team, which can meet the needs of different levels of customers. All our products meet international quality standards and are well received in different markets around the world. We have a professional foreign trade team to expand overseas markets, can timely and properly deal with the problems raised by customers.


 

 

1. who are we?
We are headquartered in Hebei, China and have been selling our products to the domestic market (90.00%), North America (3.00%), Southeast Asia (3.00%), Oceania (00.00%), Middle East (00.00%), East Asia (00.00%), and South Asia (00.00%) since 2016. We have a total of about 11-50 people in our office.

2. How do we ensure the quality?
We do sample pre-production before mass production;
Final inspection must be done before shipment;

3. What can you buy from us?
Biodegradable materials, plastic raw materials, thermoplastic elastomer materials, additives, steel. 4.

4. Why buy from us instead of other suppliers?
Our strong investment background and purchasing channels
Professional and experienced purchasing and sales team

5. What services can we provide?
Accepted delivery terms: FOB, CIF, CIF, ex works;
Accepted payment currencies: USD, EUR, HKD, RMB;
Accepted payment terms: T/T,L/C T/T, L/C;
Languages: English, Chinese

6.Are you a manufacturer or a trading company?
We are a manufacturer located in Hebei Province.

7.Can I get some samples before I place an order?
Yes, we can provide free samples, but you will pay the freight.

8. How long will it take to get a sample?
7-10 days for general products, 30-40 days for customized products. Depends on production arrangements.

9.What documents do you provide?
Usually we provide commercial invoice, packing list, bill of lading, COA, health certificate. If your market has any special requirements, please let us know.