Customization: | Available |
---|---|
Carrier: | PE |
Color: | White |
Still deciding? Get samples of US$ 3/kg
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
Properties:High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of
0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good
mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good
Performance of the project
|
Test condition [condition]
|
The test method
|
The test data
|
The data unit
|
|
Basic performance
|
Density mass index
|
|
GB/T 1033
|
0.948±0.002
|
g/cm3
|
Density test results
|
|
GB/T 1033
|
0.948
|
g/cm4
|
|
Melt flow rate mass index
|
190ºC/5.0kg
|
GB/T 3682
|
0.23±0.03
|
g/10min
|
|
Melt flow rate test results
|
|
GB/T 3682
|
0.25
|
g/10min
|
|
Melt flow rate mass index
|
190ºC/21.6kg
|
GB/T 3682
|
6.2±1.5
|
g/10min
|
|
Melt flow rate test results
|
|
GB/T 3682
|
6.4
|
g/10min
|
|
Mechanical properties of
|
Tensile yield strength quality index
|
|
GB/T 1040
|
≥23
|
MPa
|
Test results of tensile yield strength
|
|
GB/T 1040
|
27.6
|
MPa
|
|
Elongation at break quality index
|
|
GB/T 1040
|
≥600
|
%
|
|
Test results of elongation at break
|
|
GB/T 1040
|
804
|
%
|
|
Quality index of impact strength of simply supported beam
|
|
GB/T 1043
|
≥25
|
KJ/m2
|
|
Test results of impact strength of simply supported beam
|
|
GB/T 1043
|
26.7
|
KJ/m2
|
|
Other properties
|
Volatile matter quality index
|
|
GB/T 15658 1
|
≤350
|
mg/kg
|
Volatile test results
|
|
GB/T 15658 1
|
Did not check out
|
mg/kg
|
|
Biochemical property
|
Cleanliness (color granule) quality index
|
|
SH/T 1541
|
≤20
|
grain/kg
|
Cleanliness (color particle) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
Cleanliness (impurities) quality index
|
|
SH/T 1541
|
≤60
|
grain/kg
|
|
Cleanliness (impurities) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
Item | Test condition | Test Method | Value | Unit |
Density | ISO 1183 | 0.944-0.955 | g/cm3 | |
MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
Tensile strength at yield | ISO 527-2 | 22 | MPa | |
Elongation at break | ISO 527-2 | >350 | % | |
ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
VICAT | ASTM D-1525 | 126 | °C |
Item | Test Condition | Test Method | Value | Unit |
Density | ISO 1183 | 0.950~0.955 | g/cm | |
MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
Tensile strength at yield | ISO 527-2 | 24 | MPa | |
Elongation at break | ISO 527-2 | >600 | % |
Item | Test Condition | Test Method | Value | Unit |
MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
Density | --- | ASTM D-792 | 0.954 | g/cm3 |
Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
Elongation at break | --- | ASTM D-638 | 250 | % |
Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
ESCR | ASTM D-1693 | 3 | --- | |
VACIT | --- | ASTM D-1525 | 127 | °C |
1.Packing:
25kg/ carton or 25kg/bag, or per your requirement.
18mt/20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
1. Are youtrading company or Manufacturer ?
We are factory
2.About Sample
Less than 5 KG Free Sample can be offered after 5-7days.exclude cost of freight,If more sample requested, we will refund the
sample fee in the first order.
3. About Material
We can customize the material according to customers' requirement.
4. About Color
We can match the material color according to the appointed Pantone/RAL#.
5. About Inspection
We have standard inspect procedure and full set of test equipment.
6. About Quality
All the products must be tested strictly according to the testing procedure before shipment.
7. About Delivery Period
Normally delivered in 10-15 working days after the confirmation of order& payment. And it varies according to the material and
quantity.
8. About Payment term
It's flexible, TT, L/C at sight,payment≤$1000,100% in advance.payment≥$1000,40% in advance,balance by copy B/L
9.How do you make our business a long-term good relationship?
1. We maintain excellent quality and competitive prices to ensure the interests of our customers;
2. we respect every customer, such as our friends, we sincerely do business, make friends, no matter where they come from